How many pickets for a 50 ft privacy fence?

Data checked October 2026

Short answer

A 50 ft wood privacy fence 6 ft tall takes 121 pickets (110 plus 10% extra), 8 posts, 21 2×4 rails and 32 bags of 50-lb Fast-Setting concrete.

5.5-in pickets butted tight: 600 in ÷ 5.5 in = 109.1 → 110 pickets, 121 with 10% spare for splits and knots.
8 posts — 6 line posts plus 2 end posts (7 sections). With a 4-ft gate in the run it becomes 8 posts, 2 of them gate posts, and 121 pickets; bent into a U of 12.5, 25 and 12.5 ft it takes 9 posts.
Buy 10-ft posts: a 6-ft fence buries 36 in (a third of the post) on 4 in of gravel, so it needs 9' — 8-ft posts would leave only 24 in in the ground.
3 rails per section → 21 2×4×8 rails, plus 660 2-in and 63 3-in galvanized screws or nails.
Concrete: 32 × 50-lb Fast-Setting (4 per post, 0.38 yd³) — 1,600 lb to haul and about 32 gal of water.
Materials come to about $856 ($17.12/ft) at October 2026 prices, versus $750–$2,250 installed (Modernize, Aug 2026).
Built in cedar instead of pressure-treated pine, the same materials run about $1,059 ($203 more).
At 6-ft post spacing — stiffer in high-wind areas — the run takes 10 posts instead of 8.

Adjust it to your exact job

Fence type

Style

1×6 pickets butted side by side on 2×4 rails — the classic 6-ft stockade-style fence.

Height

Post spacing

On center. Home Depot's install sheet caps wood fence posts at 8 ft apart; each side is divided evenly.

Fence line50 ft total

Fence length

= 50' · 15.24 m

Gates

Walk gates

Double drive gates

You need

121pickets (5.5 in × 6 ft)

8 posts · 21 rails · 32 × 50-lb bags of concrete for 50' of fence (2.18 pickets per foot, 10% extra included)

6 line2 end

Posts: 86 line · 2 end
Rails (2×4×8): 213 per section
Concrete: 32× 50 lb4 per line & end post
Post spacing: 7' 1.75"on center, divided evenly

Posts to buy

Posts by type
Post	Buy	Hole	Fill
Line × 6	4×4 × 10 ft	10 × 40 in	4 bags
End × 2	4×4 × 10 ft	10 × 40 in	4 bags

Each post goes 36 in into the ground on 4 in of gravel, so a 6-ft fence needs posts at least 9' long. Concrete stops 3 in below grade so soil or sod can cover it.

Concrete: 32 × 50-lb Fast-Setting

10.1 ft³ · 0.38 yd³

Counted hole by hole: 4 per line & end post. Dry-poured bags can't be split between holes, so each post rounds up.
Water: about 32 gal (1 gal poured over each 50-lb bag). Weight to haul: 1,600 lb.
Filling the hole to the top with no gravel or soil cap would take 5 bags per line post — that is why bag counts online disagree.
Wait 4 hours before hanging rails, panels or gates on the posts.
With 80-lb Concrete Mix instead: 24 bags, about $155 versus $255 — cheaper per yard, but it must be mixed first and cures for 24 hours.

Different hole size or a single post? Use the post hole concrete calculator.

Pickets: 121

Fence sections: 110
Gate leaves: 0
Spare (10%): 11
On center: 5.5 in

Boards butted edge to edge — 2.18 per foot, 18 per 8-ft section. Keep the bottoms 2 in off the ground so they don't wick up water.

These holes take more than 30 in of concrete. Quikrete says to dry-pour Fast-Setting in lifts: fill to 30 in or less, soak with water, then add the rest.

Before you dig

Call 811 (free) a few days ahead to have buried utilities marked. Confirm the property line and set posts a few inches inside it, and check permit, zoning and HOA height rules — front-yard limits are often lower than backyard ones. In cold climates, ask your building department for the local frost depth and enter it above — posts that stop short of it can heave.

Shopping list

8 posts 4×4×10 ft ground-contact PT posts6 line, 2 end$157
121 pickets Pressure-treated pine dog-ear pickets, 5.5 in × 6 ft110 fence + 0 gate + 11 spare$276
21 boards 2×4×8 ft ground-contact PT rails3 per section · Estimate — we could not verify a current shelf price$147
32 bags Quikrete Fast-Setting Concrete Mix (No. 1004), 50 lb bags4 per line & end post$255
3 bags All-purpose gravel, 0.5 cu ft bags4 in drainage base under each post$20.85
660 pcs 2 in hot-dip galvanized or stainless screws/nails (pickets)2 per picket per rail
63 pcs 3 in hot-dip galvanized or stainless screws/nails (rails)
8 caps Post capsoften forgotten — keeps water out of end grain

Estimated total$856

Cost estimate

Tap a price to use your store's

4×4×10 ft ground-contact PT posts
8 posts × $
$157
Pressure-treated pine dog-ear pickets, 5.5 in × 6 ft
121 pickets × $
$276
2×4×8 ft ground-contact PT rails
21 boards × $Estimate — we could not verify a current shelf price
$147
Quikrete Fast-Setting Concrete Mix (No. 1004), 50 lb bags
32 bags × $
$255
All-purpose gravel, 0.5 cu ft bags
3 bags × $
$20.85

Materials total$856

Typical U.S. big-box prices, checked October 2026; posts and pickets are 2026 snapshots. Not in the total: 2 in hot-dip galvanized or stainless screws/nails (pickets), 3 in hot-dip galvanized or stainless screws/nails (rails), post caps.

Hiring it out instead?

Installed wood privacy fences run about $15–$45 per foot (Modernize, Aug 2026) — roughly $750–$2,250 for 50', against about $856 in materials above. Compare materials, gates and removal →

Did this answer your question?

Compare

50 ft of fence in every style

Style	Boards / panels	Posts	Concrete bags	Materials
Wood privacy, 6 ft	121 pickets	8	32	$856
Board-on-board, 6 ft	165 pickets	8	32	$956
Spaced picket, 4 ft	110 pickets	8	24	$566
Prebuilt wood panels, 6 ft	7 panels	8	32	$972
Vinyl privacy panels, 6 ft	7 panels	8	24	$1,364

How this was worked out

Posts: 50 ft ÷ 8 ft maximum spacing = 6.25, rounded up to 7 sections, spaced evenly at 7' 1.75". A straight run needs one more post than it has sections: 7 + 1 = 8. Every corner shares a post; every gate adds two.

Concrete per post: a 10-in hole has 78.5 sq in of area; minus the 3.5 × 3.5 in post leaves 66.3 sq in. Concrete fills 33 in (the 36-in embedment minus a 3-in soil cap): 66.3 × 33 ÷ 1,728 = 1.27 cu ft ÷ 0.375 cu ft per bag = 3.38 → 4 bags.

Prices used: 4×4×10 ft ground-contact PT posts $19.68; Pressure-treated pine dog-ear pickets, 5.5 in × 6 ft $2.28; 2×4×8 ft ground-contact PT rails $6.98 (estimate); Quikrete Fast-Setting Concrete Mix (No. 1004), 50 lb bags $7.97; All-purpose gravel, 0.5 cu ft bags $6.95. Tap any price in the calculator to use your store's.

The full method, material data and tips are on the main fence calculator page.

Similar jobs

Other sizes people check

Sources

Data behind this answer

The Home Depot — Do It Yourself Fence Installation sheet — posts ≤ 8 ft on center, 10 in holes, 4 in gravel, rails ≤ 24 in apart, 6 fasteners per picket, pickets 2 in off the ground · checked October 2026
Quikrete Fast-Setting Concrete Mix No. 1004 — data sheet (rev. Nov 2025) — 50 lb = 0.375 cu ft; hole 3× post width; fill to 3–4 in below grade; ~1 gal water per bag; lifts ≤ 30 in; 4 h before load · checked October 2026
Quikrete Concrete Mix No. 1101 — data sheet (rev. Oct 2022) — 80 lb = 0.60 cu ft; 6–9 pt water per bag; 24 h before strain · checked October 2026
Quikrete — Setting Posts in Concrete (how-to) — bury 1/3 of the post (= half the above-ground height) plus 6 in of gravel · checked October 2026
Western Red Cedar Lumber Association — fence specifications — 4×4 dresses to 3-9/16 in, 6×6 to 5-1/2 in · checked October 2026
Master Halco — Western Red Cedar fence boards — actual picket widths 3-1/2, 5-1/2 and 7-1/2 in · checked October 2026
Catalyst Fence — Privacy Vinyl Fence Kit instructions (rev. 1.25) — post centers = panel + post width; 10 in holes for 5×5; 6 in gravel; 2 in ground clearance · checked October 2026
Catalyst Fence — Newbury vinyl SKU pages (rev. 6/2026) — 6 and 8 ft panels on 5×5 posts; 97 in post centers (Premium LX); 108 in posts for 6×8 · checked October 2026
Catalyst Fence — Vinyl privacy & picket gate instructions — vinyl gate posts need a stiffener insert, sold separately · checked October 2026
CPSC — Safety Barrier Guidelines for Residential Pools (Pub. 362) — 48 in minimum height, 1-3/4 in / 4 in openings, 1-1/4 in chain-link mesh, 2 in bottom gap over grass · checked October 2026
Home Depot & Lowe's listings — PT posts, pickets and 6×8 panels (2026 snapshots) — 4×4×8 $11.18, 4×4×10 $19.68, 6×6×8 $37.68, pickets $2.28 PT / $3.96 cedar, PT panel $76.98 · checked October 2026
Home Depot — Veranda vinyl fence panels and posts (2026 snapshots) — 6×8 white privacy panel $119.47 typical; 5×5 posts $35.40–$62.99 · checked October 2026
Home Depot price history — Quikrete 50 lb Fast-Setting (Glassit tracker) — $7.97 per bag (Aug 2026); 80 lb Concrete Mix $6.47 (Sept 2026) · checked October 2026
Sakrete All-Purpose Gravel / Mulch Pros price list — 0.5 cu ft per bag; $6.95 per 0.5 cu ft bag (Oct 2026) · checked October 2026
Thompson's WaterSeal — Semi-Transparent Wood Sealer — 150–400 sq ft/gal; wait 30 days on new pressure-treated wood · checked October 2026
Ready Seal — FAQ — new pressure-treated wood: 1 month minimum, 2–3 months recommended before staining · checked October 2026
Minnesota Rules 1303.1600 — footing depth for frost protection — 60 in in Zone I (north), 42 in in Zone II (south) · checked October 2026
Modernize — Fence installation cost (updated Aug 12 2026) — installed $/ft by material, labor $5–15/ft, 150-ft totals · checked October 2026
Fixr — Wood, picket, chain-link and vinyl fence cost guides (Jan 2025) — $/ft by style and species, gates, removal $2–5/ft · checked October 2026

Short answer

A 50 ft wood privacy fence 6 ft tall takes 121 pickets (110 plus 10% extra), 8 posts, 21 2×4 rails and 32 bags of 50-lb Fast-Setting concrete.

5.5-in pickets butted tight: 600 in ÷ 5.5 in = 109.1 → 110 pickets, 121 with 10% spare for splits and knots.

8 posts — 6 line posts plus 2 end posts (7 sections). With a 4-ft gate in the run it becomes 8 posts, 2 of them gate posts, and 121 pickets; bent into a U of 12.5, 25 and 12.5 ft it takes 9 posts.

Buy 10-ft posts: a 6-ft fence buries 36 in (a third of the post) on 4 in of gravel, so it needs 9' — 8-ft posts would leave only 24 in in the ground.

3 rails per section → 21 2×4×8 rails, plus 660 2-in and 63 3-in galvanized screws or nails.

Concrete: 32 × 50-lb Fast-Setting (4 per post, 0.38 yd³) — 1,600 lb to haul and about 32 gal of water.

Materials come to about $856 ($17.12/ft) at October 2026 prices, versus $750–$2,250 installed (Modernize, Aug 2026).

Built in cedar instead of pressure-treated pine, the same materials run about $1,059 ($203 more).

At 6-ft post spacing — stiffer in high-wind areas — the run takes 10 posts instead of 8.

Adjust it to your exact job

Fence type

Style

1×6 pickets butted side by side on 2×4 rails — the classic 6-ft stockade-style fence.

Height

Post spacing

On center. Home Depot's install sheet caps wood fence posts at 8 ft apart; each side is divided evenly.

Fence line50 ft total

Fence length

= 50' · 15.24 m

Gates

Walk gates

Double drive gates

You need

121pickets (5.5 in × 6 ft)

8 posts · 21 rails · 32 × 50-lb bags of concrete for 50' of fence (2.18 pickets per foot, 10% extra included)

6 line2 end

Posts: 86 line · 2 end
Rails (2×4×8): 213 per section
Concrete: 32× 50 lb4 per line & end post
Post spacing: 7' 1.75"on center, divided evenly

Posts to buy

Posts by type
Post	Buy	Hole	Fill
Line × 6	4×4 × 10 ft	10 × 40 in	4 bags
End × 2	4×4 × 10 ft	10 × 40 in	4 bags

Each post goes 36 in into the ground on 4 in of gravel, so a 6-ft fence needs posts at least 9' long. Concrete stops 3 in below grade so soil or sod can cover it.

Concrete: 32 × 50-lb Fast-Setting

10.1 ft³ · 0.38 yd³

Counted hole by hole: 4 per line & end post. Dry-poured bags can't be split between holes, so each post rounds up.
Water: about 32 gal (1 gal poured over each 50-lb bag). Weight to haul: 1,600 lb.
Filling the hole to the top with no gravel or soil cap would take 5 bags per line post — that is why bag counts online disagree.
Wait 4 hours before hanging rails, panels or gates on the posts.
With 80-lb Concrete Mix instead: 24 bags, about $155 versus $255 — cheaper per yard, but it must be mixed first and cures for 24 hours.

Different hole size or a single post? Use the post hole concrete calculator.

Pickets: 121

Fence sections: 110
Gate leaves: 0
Spare (10%): 11
On center: 5.5 in

Boards butted edge to edge — 2.18 per foot, 18 per 8-ft section. Keep the bottoms 2 in off the ground so they don't wick up water.

These holes take more than 30 in of concrete. Quikrete says to dry-pour Fast-Setting in lifts: fill to 30 in or less, soak with water, then add the rest.

Before you dig

Shopping list

8 posts 4×4×10 ft ground-contact PT posts6 line, 2 end$157
121 pickets Pressure-treated pine dog-ear pickets, 5.5 in × 6 ft110 fence + 0 gate + 11 spare$276
21 boards 2×4×8 ft ground-contact PT rails3 per section · Estimate — we could not verify a current shelf price$147
32 bags Quikrete Fast-Setting Concrete Mix (No. 1004), 50 lb bags4 per line & end post$255
3 bags All-purpose gravel, 0.5 cu ft bags4 in drainage base under each post$20.85
660 pcs 2 in hot-dip galvanized or stainless screws/nails (pickets)2 per picket per rail
63 pcs 3 in hot-dip galvanized or stainless screws/nails (rails)
8 caps Post capsoften forgotten — keeps water out of end grain

Estimated total$856

Cost estimate

Tap a price to use your store's

4×4×10 ft ground-contact PT posts
8 posts × $
$157
Pressure-treated pine dog-ear pickets, 5.5 in × 6 ft
121 pickets × $
$276
2×4×8 ft ground-contact PT rails
21 boards × $Estimate — we could not verify a current shelf price
$147
Quikrete Fast-Setting Concrete Mix (No. 1004), 50 lb bags
32 bags × $
$255
All-purpose gravel, 0.5 cu ft bags
3 bags × $
$20.85

Materials total$856

Hiring it out instead?

Installed wood privacy fences run about $15–$45 per foot (Modernize, Aug 2026) — roughly $750–$2,250 for 50', against about $856 in materials above. Compare materials, gates and removal →

Style

Boards / panels

Posts

Concrete bags

Materials

Wood privacy, 6 ft

121 pickets

$856

Board-on-board, 6 ft

165 pickets

$956

Spaced picket, 4 ft

110 pickets

$566

Prebuilt wood panels, 6 ft

7 panels

$972

Vinyl privacy panels, 6 ft

7 panels

$1,364

How this was worked out

The full method, material data and tips are on the main fence calculator page.