A 1,000 sq ft roof is 10 squares — 31 bundles of 32.8-sq-ft architectural shingles before waste, 33 for a simple gable (7% waste) or 35 for a hip roof (14%).
| Item | Covers | Buy |
|---|---|---|
| Starter strip | 128 ft | 2 bundles |
| Hip & ridge cap | 37 ft | 2 bundles |
| Underlayment | 1,000 sq ft | 2 rolls |
| Ice & water | 147 ft | 3 rolls |
| Drip edge | 128 ft | 14 × 10 ft |
| Nails | 3,292 nails | 1 coil box |
| Ridge vent | 24 ft | 6 × 4 ft |
Code runs it from the eave edge to 24 in inside the exterior wall, measured level — counted here from the wall's inside face, as Owens Corning requires. With a 12-in overhang and 6-in wall at 6/12 that is 47 in up the slope → 2 courses of 36-in membrane. Valleys get one 36-in strip centered on the valley line.
Exhaust 429 sq in → 24 ft of ridge vent at 18 sq in per ft. Intake 429 sq in → 48 ft of continuous soffit vent or 8 16×8 vents. Intake should match or beat exhaust; if your attic qualifies for 1/300 (balanced vents, plus a vapor retarder in climate zones 6–8), halve these.
| Line | Bundles | Est. cost |
|---|---|---|
| Architectural32.8 sq ft per bundle | 33 | $1,485 |
| GAF Timberline HDZ32.8 sq ft per bundle | 33 | $1,485 |
| OC Duration32.8 sq ft per bundle | 33 | $1,551 |
| OC Oakridge32.8 sq ft per bundle | 33 | $1,485 |
| CertainTeed Landmark33.3 sq ft per bundle | 33 | $1,419 |
| IKO Cambridge / Dynasty33.3 sq ft per bundle | 33 | $1,485 |
| Atlas Pinnacle33.3 sq ft per bundle | 33 | $1,485 |
| 3-tab32.3 sq ft per bundle | 34 | $1,462 |
Typical range $4,325–$7,325 · about $5.83 per sq ft of roof
One layer of old architectural shingles ≈ 1.2 tons and 5 cu yd. Book a 15-yard dumpster (about 1.5 tons included). Rentals run $395–$875; shingles hit the weight limit long before the bin is full.
Shelf prices from McCoy's (San Marcos, TX) checked Oct 23, 2026; GAF Timberline HDZ, IKO and Atlas shingles use a typical architectural price. Tap any price to use your supplier's.
| Line | Sq ft / bundle | Gable (+7%) | Hip (+14%) | Cost (gable) |
|---|---|---|---|---|
| Architectural | 32.8 | 33 | 35 | $1,485 |
| GAF Timberline HDZ | 32.8 | 33 | 35 | $1,485 |
| OC Duration | 32.8 | 33 | 35 | $1,551 |
| OC Oakridge | 32.8 | 33 | 35 | $1,485 |
| CertainTeed Landmark | 33.3 | 33 | 35 | $1,419 |
| IKO Cambridge / Dynasty | 33.3 | 33 | 35 | $1,485 |
| Atlas Pinnacle | 33.3 | 33 | 35 | $1,485 |
| 3-tab | 32.3 | 34 | 36 | $1,462 |
1,000 sq ft ÷ 100 = 10 squares. Add waste — 7% for a gable this size or 14% for a hip, from CertainTeed's Shingle Applicator's Manual — then divide by the coverage per bundle: 1,000 × 1.07 ÷ 32.8 = 32.6, rounded up to 33 bundles.
If your 1,000 sq ft is the house's floor area rather than a measured roof area, the roof is bigger: add the overhangs and multiply by the pitch factor (1.118 at 6/12). Switch the calculator to "House footprint" to do that.
The full method, material data and tips are on the main roofing calculator page.