A 3,000 sq ft roof is 30 squares — 92 bundles of 32.8-sq-ft architectural shingles before waste, 95 for a simple gable (3% waste) or 99 for a hip roof (8%).
| Item | Covers | Buy |
|---|---|---|
| Starter strip | 222 ft | 3 bundles |
| Hip & ridge cap | 63 ft | 3 bundles |
| Underlayment | 3,000 sq ft | 4 rolls |
| Ice & water | 254 ft | 4 rolls |
| Drip edge | 222 ft | 23 × 10 ft |
| Nails | 8,931 nails | 2 coil boxes |
| Ridge vent | 60 ft | 15 × 4 ft |
Code runs it from the eave edge to 24 in inside the exterior wall, measured level — counted here from the wall's inside face, as Owens Corning requires. With a 12-in overhang and 6-in wall at 6/12 that is 47 in up the slope → 2 courses of 36-in membrane. Valleys get one 36-in strip centered on the valley line.
Exhaust 1,288 sq in → 60 ft of ridge vent at 18 sq in per ft (you'd want 72 ft). Intake 1,288 sq in → 143 ft of continuous soffit vent or 23 16×8 vents. Intake should match or beat exhaust; if your attic qualifies for 1/300 (balanced vents, plus a vapor retarder in climate zones 6–8), halve these.
| Line | Bundles | Est. cost |
|---|---|---|
| Architectural32.8 sq ft per bundle | 95 | $4,274 |
| GAF Timberline HDZ32.8 sq ft per bundle | 95 | $4,274 |
| OC Duration32.8 sq ft per bundle | 95 | $3,976 |
| OC Oakridge32.8 sq ft per bundle | 95 | $3,813 |
| CertainTeed Landmark33.3 sq ft per bundle | 93 | $3,556 |
| IKO Cambridge / Dynasty33.3 sq ft per bundle | 93 | $4,184 |
| Atlas Pinnacle33.3 sq ft per bundle | 93 | $4,184 |
| 3-tab32.3 sq ft per bundle | 96 | $4,127 |
Typical range $12,325–$21,325 · about $5.61 per sq ft of roof
One layer of old architectural shingles ≈ 3.6 tons and 15 cu yd. Book a 30-yard dumpster (about 3 tons included; expect ~0.6 tons over, roughly $60.00 at $100/ton). Rentals run $395–$875; shingles hit the weight limit long before the bin is full.
Shelf prices from McCoy's (San Marcos, TX) checked Oct 23, 2026; GAF Timberline HDZ, IKO and Atlas shingles use a typical architectural price. Tap any price to use your supplier's.
| Line | Sq ft / bundle | Gable (+3%) | Hip (+8%) | Cost (gable) |
|---|---|---|---|---|
| Architectural | 32.8 | 95 | 99 | $4,274 |
| GAF Timberline HDZ | 32.8 | 95 | 99 | $4,274 |
| OC Duration | 32.8 | 95 | 99 | $3,976 |
| OC Oakridge | 32.8 | 95 | 99 | $3,813 |
| CertainTeed Landmark | 33.3 | 93 | 98 | $3,556 |
| IKO Cambridge / Dynasty | 33.3 | 93 | 98 | $4,184 |
| Atlas Pinnacle | 33.3 | 93 | 98 | $4,184 |
| 3-tab | 32.3 | 96 | 101 | $4,127 |
3,000 sq ft ÷ 100 = 30 squares. Add waste — 3% for a gable this size or 8% for a hip, from CertainTeed's Shingle Applicator's Manual — then divide by the coverage per bundle: 3,000 × 1.03 ÷ 32.8 = 94.2, rounded up to 95 bundles.
If your 3,000 sq ft is the house's floor area rather than a measured roof area, the roof is bigger: add the overhangs and multiply by the pitch factor (1.118 at 6/12). Switch the calculator to "House footprint" to do that.
The full method, material data and tips are on the main roofing calculator page.