A 2,000 sq ft roof is 20 squares — 61 bundles of 32.8-sq-ft architectural shingles before waste, 64 for a simple gable (4% waste) or 67 for a hip roof (9%).
| Item | Covers | Buy |
|---|---|---|
| Starter strip | 181 ft | 2 bundles |
| Hip & ridge cap | 52 ft | 3 bundles |
| Underlayment | 2,000 sq ft | 3 rolls |
| Ice & water | 207 ft | 4 rolls |
| Drip edge | 181 ft | 19 × 10 ft |
| Nails | 6,136 nails | 1 coil box |
| Ridge vent | 48 ft | 12 × 4 ft |
Code runs it from the eave edge to 24 in inside the exterior wall, measured level — counted here from the wall's inside face, as Owens Corning requires. With a 12-in overhang and 6-in wall at 6/12 that is 47 in up the slope → 2 courses of 36-in membrane. Valleys get one 36-in strip centered on the valley line.
Exhaust 859 sq in → 48 ft of ridge vent at 18 sq in per ft. Intake 859 sq in → 95 ft of continuous soffit vent or 16 16×8 vents. Intake should match or beat exhaust; if your attic qualifies for 1/300 (balanced vents, plus a vapor retarder in climate zones 6–8), halve these.
| Line | Bundles | Est. cost |
|---|---|---|
| Architectural32.8 sq ft per bundle | 64 | $2,879 |
| GAF Timberline HDZ32.8 sq ft per bundle | 64 | $2,879 |
| OC Duration32.8 sq ft per bundle | 64 | $2,678 |
| OC Oakridge32.8 sq ft per bundle | 64 | $2,569 |
| CertainTeed Landmark33.3 sq ft per bundle | 63 | $2,409 |
| IKO Cambridge / Dynasty33.3 sq ft per bundle | 63 | $2,834 |
| Atlas Pinnacle33.3 sq ft per bundle | 63 | $2,834 |
| 3-tab32.3 sq ft per bundle | 65 | $2,794 |
Typical range $8,325–$14,325 · about $5.66 per sq ft of roof
One layer of old architectural shingles ≈ 2.4 tons and 10 cu yd. Book a 30-yard dumpster (about 3 tons included). Rentals run $395–$875; shingles hit the weight limit long before the bin is full.
Shelf prices from McCoy's (San Marcos, TX) checked Oct 23, 2026; GAF Timberline HDZ, IKO and Atlas shingles use a typical architectural price. Tap any price to use your supplier's.
| Line | Sq ft / bundle | Gable (+4%) | Hip (+9%) | Cost (gable) |
|---|---|---|---|---|
| Architectural | 32.8 | 64 | 67 | $2,879 |
| GAF Timberline HDZ | 32.8 | 64 | 67 | $2,879 |
| OC Duration | 32.8 | 64 | 67 | $2,678 |
| OC Oakridge | 32.8 | 64 | 67 | $2,569 |
| CertainTeed Landmark | 33.3 | 63 | 66 | $2,409 |
| IKO Cambridge / Dynasty | 33.3 | 63 | 66 | $2,834 |
| Atlas Pinnacle | 33.3 | 63 | 66 | $2,834 |
| 3-tab | 32.3 | 65 | 68 | $2,794 |
2,000 sq ft ÷ 100 = 20 squares. Add waste — 4% for a gable this size or 9% for a hip, from CertainTeed's Shingle Applicator's Manual — then divide by the coverage per bundle: 2,000 × 1.04 ÷ 32.8 = 63.4, rounded up to 64 bundles.
If your 2,000 sq ft is the house's floor area rather than a measured roof area, the roof is bigger: add the overhangs and multiply by the pitch factor (1.118 at 6/12). Switch the calculator to "House footprint" to do that.
The full method, material data and tips are on the main roofing calculator page.